The low pressure sand jet can be used on all hulls :- metal, wood, marine ply, Ferro-concrete and fiberglass.

Osmosis and Anti-foul are easily dealt with.

Subsequent remedial work can be undertaken / arranged by us, for example Gel-peeling and vacuum osmosis treatments. We can also offer Zinga painting of keels. 

The system produces a smooth finish that grit blasting or sanding / scraping by hand cannot compare with.

As for properties, external and internal work can be undertaken.

 

 
Boat Cleaning (Before) Boat Cleaned (After)
A teak workboat. Antifoul removal and topside paint keying. Paint above the water is always considerably tougher than a below water layer as the sun bakes the paint to a hard layer.

 

 

 

  • The low pressures mean that the system is gentle enough to clean delicate surfaces, yet powerful enough to strip multiple layers of paint in one pass. 
  • It is not a chemical process so no noxious or harmful slurries or fumes are generated. As it uses only minimal amounts of water and abrasive the system is regularly used indoors.
  • Considerably less mess than other systems, the low pressures mean that secondary mess (dust being blown out of floorboards etc) is also minimised.
  • Has successfully cleaned stone, bricks, metal, hard woods and fiberglass. Quick efficient Graffiti Removal. No interference with other work in area. 
  • Additional services can be provided by CC Surface Restorers, including Gel-coat peeling for Osmosis treatment of glass fibre boats.